Hey everyone,

I recently built my first NAS. It was bough used with SAS hardware. I’ve finally got past all the roadblocks and problems that were in my way (I basically bricked a whole SAS drive, a hero of a lemmy user helped me fix it).

Now after filling the 15 TB of RAIDZ2 with around 100gb of data. One of the drives started waiving its white flag and wants to die on me.

I am a complete beginner with no experience with these things.

Is my drive dying and should be replaced? or can it be fixed?

This is the output of the 507 errors that TrueNAS received form it and labelled the vDev as degraded and the drive as faulted:

Output of zpool status and sudo smartctl -a /dev/sdd

As a beginner it looks like this drive is cooked, please let me know if it needs replacing so I can order a new one and replace it right away.

Thank you sooo much!

Edit: SAS not SATA drives

  • s38b35M5@lemmy.worldEnglish
    4·
    16 hours ago

    I second this. SATA cables are cheaply made and can present issues that seem to indicate drive failure.

    • BigDaddySlim@lemmy.worldEnglish
      2·
      15 hours ago

      Had this issue once, 2 drives kept not initializing during boot, rebooting a few times got them to register but showed drive errors. I thought either the drives or my SAS card was dying. Fully reseating the connectors fixed it and haven’t had an issue since.